Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi

Short Description:

This relates to the specialized field of powder metallurgy, as the density, porosity, materials and heat treatment methods of powder metallurgy gears directly affect the hardness and strength.High density refers to the alloy elements of high hardness, small pores, high density, good material, high hardness.Heat treatment methods generally include carburizing quenching, carbonitriding, high frequency quenching, low frequency quenching, oil quenching, etc.Stable and qualified quenching process keeps the hardness of heat treatment stable.


Product Detail

Company strength

Product Tags

Related Video

Feedback (2)

Sticking for the belief of "Creating items of top of the range and creating buddies with people today from all over the world", we normally put the interest of shoppers in the first place for Powder Metallurgy Metal Injection Molding, Automobile Spare Parts, Customized Stainless Steel Powder Metallurgy, Since establishment within the early 1990s, now we have arrange our sale network in USA, Germany, Asia, and several Middle Eastern countries. We intention to get a top class supplier for worldwide OEM and aftermarket!
Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi Detail:

The density of common atomized powder (including carbon steel and copper-carbon alloy steel) is above 6.9, and the quenching hardness can be controlled around HRC30.

In general, the density of the pre-alloyed powder (AB powder) exceeds 6.95, and the quenching hardness can be controlled around HRC35.

High prealloyed powders with density greater than 6.95 and quenching hardness controlled at HRC40.

Powder metallurgy products made of the above materials have stable density and material, and the hardness after heat treatment meets the corresponding requirements, so their tensile strength and compressive strength will reach a better peak.

However, because the density of PM products is not as high as that of No. 45 steel, the highest density of PM pressing parts is usually 7.2 g/cm, while the density of No. 45 steel is 7.9 g/cm.Forced carburizing of powder metallurgy or high frequency heat treatment exceeding HRC45 will make the powder metallurgy products brittle due to high quenching, resulting in the strength of the powder metallurgy products.

1. High material utilization rate, up to more than 95%

2. No or only a little cutting is required

3. Good dimensional consistency of parts, good stability and high precision.

4. Strength comparison: professional powder metallurgy manufacturers have optimized the powder metallurgy mold design, and the tensile strength and compressive strength of the gear produced are close to that of the hobbing gear.For example, the driven gear of the automobile gearbox with high transmission intensity is also powder metallurgy gear.Visible, powder metallurgy gear is practical and extensive.

5. Powder pressing molding using mold molding, can produce other cutting hobbing technology can not produce complex shapes.

6. Because it is suitable for mass production, the production efficiency is high and the cost is lower than cutting.

7. Suitable for mass production, so the price is absolutely competitive.


Product detail pictures:

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures

Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi detail pictures


Related Product Guide:

Every member from our high efficiency sales team values customers' needs and business communication for Manufacturer for Iron-Based Powder Metallurgy Parts - Powder Metallurgy Structural Parts – Xuanyi , The product will supply to all over the world, such as: Romania, Nigeria, Bangladesh, Our company's main items are widely used all over the world; 80% of our products and solutions exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.

123412微信图片_20210603095500微信图片_20210603095507

  • Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
    5 Stars By Rigoberto Boler from Greece - 2017.06.29 18:55
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Jocelyn from Dominica - 2018.09.29 17:23
    Write your message here and send it to us